Subscribe to:
Posts (Atom)
Popular Posts
-
Ciclop 3D Scanner Arduino Uno/CNC Shield v3 Wiring Diagram The wiring diagram covers what needs to be connected to get the CNC Shield ... -
Recently I have been thinking about building a ZX-45, but needed to machine some parts out of aluminum for the CNC conversion and possibly... -
With this Crius v2.5 board there is little no no documentation on what settings to load sketches and a predefined board type. When looking ... -
I ended up getting a good deal on a Quadrino Zoom V1E with I2C board, GPS and Bluetooth on ebay for my mini copter build and ran into some i...
-
For the Tricopter 3.2 and 3.3 I used the same settings for the KK 2.0 board. These settings will not work for everyone but its a good star... -
I thought I would put something together about the assembly of the Tricopter 3.3 base frame: 1. The parts that were cut are 3 Landing... -
This was a project that I was asked to come up with to mount a raspberry pi to the back of a tv or computer monitor. I cut this out of .06... -
I wanted to try some flashed ESC's but did not want to pay the premium that people were wanting for preflashed ESC's or the wait ti... -
Since my last post which has been a while I have been learning how to do acro (flips and rolls) with multiwii. I found that my frame felt sl... -
So i ordered a few valve covers and stumbled across one that may be aluminum for my Evo. The aluminum valve covers are from the Evo 4 from ...
