Ciclop 3D Scanner Arduino Uno/CNC Shield v3 Wiring Diagram — by Unknown on

22 comments

Ciclop 3D Scanner Arduino Uno/CNC Shield v3 Wiring Diagram The wiring diagram covers what needs to be connected to get the CNC Shield ...

CNC Gantry Rebuild....Working towards a stiffer gantry — by Unknown on

1 comment

Recently I have been thinking about building a ZX-45, but needed to machine some parts out of aluminum for the CNC conversion and  possibly...

Quadrino Zoom V1E Multiwii 2.3 with GPS — by Unknown on

0 comment

I ended up getting a good deal on a Quadrino Zoom V1E with I2C board, GPS and Bluetooth on ebay for my mini copter build and ran into some i...

Raspberry Pi Vesa Mount Case — by Unknown on

0 comment

This was a project that I was asked to come up with to mount a raspberry pi to the back of a tv or computer monitor. I cut this out of .06...

Tricopter 3.3 Frame AUW (All Up Weight) — by Unknown on

0 comment

Since my last post which has been a while I have been learning how to do acro (flips and rolls) with multiwii. I found that my frame felt sl...

Tricopter KK 2.0 Setup — by Unknown on

0 comment

For the Tricopter 3.2 and 3.3 I used the same settings for the KK 2.0 board. These settings will not work for everyone but its a good star...

Tricopter 3.3 Frame Build/ Assembly no electronics — by Unknown on

0 comment

I thought I would put something together about the assembly of the Tricopter 3.3 base frame: 1. The parts that were cut are 3 Landing...