Tricopter 3.3 Frame AUW (All Up Weight) — by Unknown on

0 comment

Since my last post which has been a while I have been learning how to do acro (flips and rolls) with multiwii. I found that my frame felt sl...

Tricopter KK 2.0 Setup — by Unknown on

0 comment

For the Tricopter 3.2 and 3.3 I used the same settings for the KK 2.0 board. These settings will not work for everyone but its a good star...

Tricopter 3.3 Frame Build/ Assembly no electronics — by Unknown on

0 comment

I thought I would put something together about the assembly of the Tricopter 3.3 base frame: 1. The parts that were cut are 3 Landing...

ESC flashing tool for ESC's with pads — by Unknown on

0 comment

I wanted to try some flashed ESC's but did not want to pay the premium that people were wanting for preflashed ESC's or the wait ti...

Asymmetrical Quadcopter V1.0 — by Unknown on

0 comment

I had decided that the X525 frame that I had multiwii installed on was not what I really wanted. I also had a lot of issues trying to get th...

Crius v2.5 Multiwii Flight Controller Board — by Unknown on

4 comments

With this Crius v2.5 board there is little no no documentation on what settings to load sketches and a predefined board type. When looking ...

Crius Multiwii v2.5 / Rc Timer HP2812-1000KV Motors Quadcopter Build — by Unknown on

1 comment

I decided that I wanted to see how a quadcopter flew compared to a tricopter and that I wanted to try out Multiwii to see how it was to setu...